Webasto BlueHeat Thermo Top, Руководство пользователя

Страница: 7 / 32

Ford F-250/350 Super Duty Truck
7
Electrical Harness Installation
ATTENTION
Modify electrical mounting bracket as shown in
Figure 2.
Cut wire tie holding negative-side blower harness (with
relay) from main harness and set aside.
Install resistor and relays on electrical mounting bracket.
– (1) Mounting bracket
– (2) Resistor
– (3) Screw M3x10, Nut M3 (2 ea.)
– (4) Pan head screw 10-32x5/8”, Nut 10-32 (2 ea.)
– (5) Relays K1 and K2
Secure the electrical mounting bracket assembly to the
bulkhead using a self-tapping screw.
– (1) Vehicle bulkhead - left corner
– (2) Electrical mounting bracket assembly
CAUTION
Use care when cutting bulkhead grommet to prevent
damage to vehicle electrical harnesses.
Cut a 12.7 mm (.5 inch) slit in the bulkhead pass-through
grommet.
Route the timer and blower control harnesses into the
interior of the vehicle through the bulkhead grommet.
Timer Installation
CAUTION
Check behind panels for obstructions before drilling
holes.
ATTENTION
Before installing the timer, please confirm the
installation location with the customer.
Affix supplied template to panel. Drill 10 mm (25/64 in.)
and 2.5 mm (3/32 in.) holes where indicated on template.
Figure 5 shows a translated sample of the template
supplied.
3
Fig. 2
4
2 1
5
Fig. 3
2
1
Fig. 4
IMAGE NOT AVAILABLE
Fig. 5