Webasto Air Top Evo 40B, Руководство по установке

Страница: 68 / 102

Air Top Evo 40 / Air Top Evo 55 Fuel
63
6 Fuel supply
6.1. General Information
The fuel is drawn from the vehicle fuel tank, the vehicle fuel line or from a
separate fuel tank.
6.2. Integration in the vehicle's supply line or return line
The fuel filler must not be situated in the passenger compart-
ment and must be provided with an effective cap to prevent
fuel spillage.
(Requirement from ECE-R 122, Point 5.3.3.1.).
In the case of liquid fuel heaters, where a supply separate
from that of the vehicle is provided, the type of fuel and its
filler point must be clearly labelled.
(Requirement from ECE-R 122, Point 5.3.3.2.) .
NOTE:
Only for ADR:
EX/II, EX/III, AT, FL and OX vehicles: see Chapter 4.1,
"Requirements for the installation location", excerpt from
directive.
The statutory regulation of ADR governing fuel tanks, ECE-
R 122, Annex 9, Point 3, must be adhered to.
NOTE:
– Fuel extraction must be almost pressureless.
– Where fuel is drawn from the return line, you must ensure
that this line is not blocked by check valves. Also make
sure that the return line reaches to the bottom of the fuel
tank.
– A zero flow must never occur in the vehicle system as a
result of fuel extraction.
– For extraction from the swirl pot, ensure that the swirl pot
is not completely empty.