Web Mountain Technologies RUC-01 Скачать руководство пользователя страница 60 | Manualshive

Страница: 60 / 100

Web Mountain Technologies RUC-01 Скачать руководство пользователя страница 60

Web Mountain Technologies

Page 54

Backup / Restore

This webpage allows the user to backup the various configuration settings used on their RUC,
and then restore them at a later date in the event that the RUC is reset.  You will also use this
function when you are doing a firmware update on your RUC.  Backup / Restore was
implemented in V27 firmware.  You will be unable to use this feature if your firmware is earlier
than V27.  Update your firmware first to the latest version on the Web Mountain website, and
manually reenter your configuration settings.  After doing this update, you can now use this
feature.

NOTE: If updating to the newest release (V57) on an existing unit from Revision 200, follow
these steps:

1.

Just to be extra careful, print out copies of all UI screens so that everything can be
manually recreated if something goes wrong.

2.

If older than v 2.00.28, first update to 2.00.28 without doing a reset, then backup the
RUC using v28. If at 2.00.28 or later, go ahead and backup the RUC.

3.

Then update to 3.00.xx. Do a factory reset and then do a restore from the saved
backup.

When you click on the Backup / Restore button from the left menu, you will now get this
webpage:

«
...
58
59
60
61
62
...
»

Содержание RUC-01





































































































Отзывы:

Нет отзывов