Weathermatic ProLine 1600 Series, Руководство пользователя, Страница: 7 / 32

2
http://support.weathermatic.com
PGM Button: The ProLine® controller has 4
watering programs (A, B, C, and D). This
is like having 4 controllers in one. You
can assign zones to any program you like
or more than one program Display will
alternately show both programs while the
concurrent schedule is running. Program
D is normally used for micro irrigation with low flow and long run
times. Sprinkler zones should be assigned to A, B, or C.
START MANUAL PROGRAM Button:
Press to initiate a watering operation
when the programming dial is set to the
RUN position. The ProLine® controller
will run Program A. Or, you can push the
PGM button before you push the START
MANUAL PROGRAM button to select
the program you want to run. You can
use the NEXT button to advance to other zones in a program that
you have started. Run Manual Program will override any omits or
delays.
Display with Program Running:
When a program is running, the screen
will display: program that is operating;
zone number that is operating; and run
time remaining. If the controller is in
PAUSE mode it is waiting for a programmed delay in the controller
to expire (run/soak, master valve delay, zone to zone delay, omit
time). The reason for the pause will be shown on the display.
Display with Dial In SYSTEM OFF Position:
When the ProLine® controller dial
is in the SYSTEM OFF position, the
processor and clock continue to
operate and all program values are
retained in the non-volatile memory. In the SYSTEM OFF position
no automatic watering will occur. If you move the dial to any
position other than RUN or SYSTEM OFF, and there is no control
panel activity for 30 minutes; the controller will return to the RUN
mode, and the display screen will show the idle default screen or
will return to a program in progress that was interrupted.
Note: If a station is running, the dial must remain in SYSTEM OFF
until the displays returns to the time of day.
LANGUAGE Button: Press the
language button to change the
language of the controller’s menus.
By default, the controller is in English.
Pressing the Language Button once
will change the controller’s language to Spanish (Español) and
the LED will reflect this change. Pressing the language button
again will change the language to Italian (Italiano), Portuguese
(Português), or German (Deutsche) respectively. When the
language is set to any language besides English or Spanish, the
Language LED will not be illuminated.
Note: No watering will take place when the
SENSOR LED is RED. This indicates a Rain, Freeze
or other type sensor has tripped, and programs
are prevented from running. The display will show
which event has triggered the sensor. A program in operation
will also pause if you turn the dial to any position other than
RUN or SYSTEM OFF. The program in operation will resume
when you return the dial to RUN or if there is no programming
activity for 30 minutes.
1.0 Getting acquainted with your ProLine® Controller
NEXT
BACK
UP
DOWN
PGM
PROGRAM
NEXT
BACK
UP
DOWN
PGM
PROGRAM PRESS TO START
MANUAL PROGRAM
PGM
PROGRAM
NEXT
BACK
UP
PRESS TO START
MANUAL PROGRAM
DOWN
ON
RAIN/FREEZE
SENSING
OFF
PGM
PROGRAM
NEXT
BACK
UP
PRESS TO START
MANUAL PROGRAM
DOWN
ON
RAIN/FREEZE
SENSING
OFF
ENGLISH
ESPAÑOL
LANGUAGE
NEXT
BACK
UP
PRESS TO START
MANUAL PROGRAM
DOWN
NEXT
BACK
UP
PRESS TO START
MANUAL PROGRAM
DOWN
PGM
PROGRAM