manualshive.com logo in svg

Weathermatic ProLine 1600 Series, Руководство пользователя, Страница: 21 / 32

Поделиться
Скачать
Weathermatic ProLine 1600 Series Скачать руководство пользователя страница 21

16

http://support.weathermatic.com

5.21   FLOW

NOTE: Flow menus require the addition of a SmartLink 

AirCard with FLOW capabilities.

5.21.1  HIGH PK

Shows the highest flow value for each individual zone, can scroll 

through each zone for a 7-day history.

5.21.2  CLR FLOW

Clears All flow data from the controller.

5.21.3 SETTINGS

Allows the user to set Flow parameters. 
  5.21.3.1   FLOW PPG

A settable value that lets the controller know how many   . .

pulses to expect per gallon.

  5.21.3.2   SENSOR

Lets the user select a custom sensor or one of our preset 

flow sensor types.

 

5.21.3.3 SHUTDOWN

Allows the user to select if the controller should shut down 

operation per zone or by system.

  5.21.3.4 LINEFILL

The time it takes for the system to purge air and completely 

fill the piping with water.

  5.21.3.5  SAMPLE T
    How often the controller reads flow pulses from the Aircard.
  5.21.3.6  LEAK DET

A settable value that determines when the controller will 

produce a Leak Detect fault. 

 

  5.21.3.7   LOW  LMT

The lowest flow value the controller can sense without 

producing a fault. 

  5.21.3.8  HIGH LMT

The highest flow value the controller can sense without 

producing a fault. 

5.21.4  TOT FLOW

Shows the daily total flow for each zone. Can scroll through each 

zone for a 7-day history.

5.21.5  LOW PK

Shows the lowest flow value for each individual zone, can scroll 

through each zone for a 7-day history.

5.22 SLW

5.22.1   RAIN

The rain selection is on/off toggle to override the SLW sensor 

feature for selected zones.  Factory default is ON for all zones.

5.22.2  FREEZE

The freeze selection is on/off toggle to override the SLW freeze 

sensor feature for selected zones.  Factory default is ON for all 

zones.

5.22.3  DELAY

This feature allows the user to adjust the factory set 48 hour 

watering delay that will occur after a rain event shutdown if 

you are using an SLW Weather Sensor for SMART Watering. To 

eliminate the delay or to reduce or increase the factory default  

hours, turn the dial to Advanced Menu and use an arrow button 

to select SLW DLY. Press the NEXT button and 48 hours will 

show in the display. Use the UP and DOWN buttons to eliminate 

5.0  Advanced Menu

Содержание ProLine 1600 Series

































Отзывы:

Нет отзывов