8
WeatherHawk®
815 W 1800 N Logan, UT 84321-1784, Email:
Toll free in USA: 866-670-5982, International: 435-227-9802, FAX: 435-227-9749 Printed 2013
5.
Start application software and monitor the sensor displays. Within a couple of minutes, numerical values
should appear confirming that the WeatherHawk is functioning. The lights labeled Scan/Receive on the underside
of the station should also blink every ten seconds.
If the WeatherHawk does not function properly, contact WeatherHawk Customer Service to solve the
problem before continuing to the next steps.
6.
Using your PC and weather station software, enter the setup parameters for the station. If you are using
WeatherHawk PRO software, see the section in this document labeled “
Station Setup usingWeatherHawk
Pro Software
”. If you are using other software, please refer to the software manual for that software.
7.
Disconnect the serial cable from the WeatherHawk and place the dust cover back on the serial port.
8.
If your WeatherHawk is wireless (Model 916/922/240), setup the radio (see “
Radio Setup
” section below).
9.
Install the WeatherHawk weather station at the site. Refer to the Installation Guide provided on the CD
shipped with your station for siting information and installation procedures.
Station Setup Using WeatherHawk PRO Software
1.
Click on the
This Station
menu and choose
Setup
from the drop down menu (Figure 4a and 4b).
2.
Select
Direct Connection
from the setup screen and select the
Serial Port
on your computer which the
serial cable is connected to. (Figure 5). If necessary, click the
Change
button next to the
Serial PortI
to
select a different port.
Figure 4a
Figure 4b
Содержание Signature Series
Страница 1: ...Signature Series User s Manual ...
