WeatherHawk®
815 W 1800 N Logan, UT 84321-1784, Email:
Toll free in USA: 866-670-5982, International: 435-227-9802, FAX: 435-227-9749 Printed 2013
TP1-TK Tripod Installation Kit
This kit includes equipment that helps you install the WeatherHawk to the correct 3-axis vertical orientation and to
align the station to the magnetic north. Using the TP1-KT to properly orient the weather station helps assure
accurate measurements.
The TP1-KT includes:
Multi-axis bubble level
Compass
Rubber band for attaching the bubble level to the tripod mast
TP1-SK Tripod Stake Kit
The TP21-SK is for anchoring the tripod to the soil. It is intended for temporary installations and sites that
experience light to moderate wind speeds.
The TP1-SK includes:
(3) ½” (1.27 cm) diameter solid steel spikes with a welded hammer cap on one end
The above pictured stake kit may be replaced by three galvanized steel spikes that offer equal or better
holding ability. Substitution is at the discretion of WeatherHawk based on product availability at the time
of order.
Sites that may experience high wind speeds should not use this kit. For those sites, anchor the tripod with
bolts and guy-wires fastened to a concrete pad or other permanent base.
TP1-MX Tripod Mast Extension
The TP1-MX extension fits into a1- ¼” diameter post and is used to increase the height of the WeatherHawk wind
sensors (See TP1 installation procedures). When used with the TP1, one extension provides a wind sensor height of
69” to 89” (179 to 231 cm). A second TP1-MX can be used to provide a wind sensor height of 98” to 120” (225 to
312 cm).
The TP1-MX includes
1¼” (32.5 mm) OD 35” (89 cm) long steel post with one end
crimped
Содержание Signature Series
Страница 1: ...Signature Series User s Manual ...
