Weatherguard PowerSync Скачать руководство пользователя страница 10

124256-01  Rev A  6/21

WEATHERGUARD.COM

Cable Routing Configurations

CABLE ROUTING CONFIGURATIONS

Saddle box with Low-Sides

Saddle box only

Low-Sides

Control Box

Actuator cable

Actuator 

Hitch or fusebox 

power connection

Hitch or fusebox 

power connection

Hitch or fusebox 

power connection

6

Fuse connection wiring harness

7ft Extension cable

15ft Extension cable

Hitch Connection wiring harness

4-way splitter

LIMITED LIFETIME  WARRANTY

WERNER CO. (the Manufacturer) warrants to the original purchaser, only, that 

WEATHER GUARD® truck products (the "WEATHER GUARD® Product") will be free from 

defects material and workmanship from the date of purchase and continuing for the 

expected lifetime of the WEATHER GUARD® Product. This warranty applies to all 

WEATHER GUARD® product except E-LINE Products, which have a 10-year warranty. 

PowerSync, which has a 3-year warranty. Please call our customer service department 

toll free at 1.800.456.7865 with any questions or comments.

DO NOT use these products for storing or transporting flammables, explosives, 

hazardous materials or waste, such as gasoline, solvents, gun powder, dynamite, 

gases or any tanks, torches or gas powered equipment. These products are intended 

and safe for storing and transporting small tools and other non-combustible, 

non-flammable materials. Any modification made to, or unintended use of, these 

products may create a dangerous condition causing death, serious bodily jury or 

property damage.

NOTICE

Any modification or unintended use of these products shall immediately void all 

manufacturers warranties. Manufacturer disclaims all liability for injuries to 

persons or property resulting from any modification to, or unintended use of 

these products.

For U.S. Terms and Conditions of Sale please reference form number 78-1117. 

For Canada Terms and Conditions of Sale please reference form number 

78-1145.

Содержание PowerSync











Отзывы: