HD MotionCam
Installation Manual
EN.PM.UM24 20160211
-3-
Page 3 of 29
Disclaimer
The procedures, methods, and hardware described in this manual are intended to provide
general guidelines and instructions for installing the WeatherBug High Definition Motion
Camera (HD MotionCam) system. Each installation site is unique and each site may
require special considerations that are beyond the scope of this manual. Any questions
not covered within this manual should be directed to WeatherBug Technical Support at
(800) 624-4205 or email [email protected].
All procedures, methods, and hardware used to install a WeatherBug HD MotionCam
system must conform to all applicable building codes (national, state, and local).
Installation subcontractors are responsible for complying with all applicable codes.
Buyer and/or installer provided hardware must be equivalent or better (according to
industry standards) than that specified in the WeatherBug HD MotionCamera Installation
Manual.
The buyer/installer is responsible for any damage caused by installation of the
WeatherBug HD MotionCam.
THINK SAFETY FIRST!
Warranty
. The Seller warrants the hardware purchased by the Buyer against defects in
workmanship and materials for a period of one (1) year from date of delivery under this
contract. The Seller shall, at its sole option, either repair or replace defective items.
Buyer is responsible to return of defective items to Seller by means specified by the
Seller. The Buyer shall bear all shipping expenses. Packing of defective items for
return is responsibility of Buyer. Damage due to natural causes (storms, lightning,
flying debris, etc.) is not covered by this warranty. Damage resulting from Buyer
negligence or mishandling of hardware and software is not covered by this warranty.
