Power indication lamp
Dust bin full
indication
Preparation for Operation:
Attention: Make sure the filter is installed correctly.
1.
Install the side brushes and install the battery according to the manual.
2.
Turn off the power switch on the side of the unit, and charge the battery for 5 hours
prior to the first operation.
3.
To ensure the best efficiency of the unit, first is to remove clothes, paper, cable,
extension cable scattered on the floor, roll up the curtains and drapes if any to avert
the possible accident. In case of the cable entangled with the cleaner, the cable could
move around as the cleaner is working and might topple down the table, chairs, even
cabinet or cupboard.
Control Panel:
D. C. jack
30 minutes working time
indication lamp
Max working time
indication lamp
Power indication lamp
Color of the lamp
Indication
Green
Power on with sufficient battery power
Green flashing
Unit is in charging mode
Red
Battery low, charging required / Wheel
stuck
Table 1
GENERAL OPERATION
3
0
M
a
x
Содержание TRC50
Страница 17: ...2 Take out the dust bin from the cleaner Grip slot for the dust bin 3 Open th e upper cover of the dust bin...
Страница 38: ...2 Retirer le r servoir de l aspirateur Prises du r servoir 3 Ouvrir le couvercle du r servoir...
Страница 82: ...2 Haal de stofbak uit de stofzuiger Handgreep voor de stofbak 3 Open de bovenste afdekking van de stofbak...