6
Problem
Illustration
Recommendation
My FlyWire will not turn on
Make sure the batteries are installed in the proper
orientation
My FlyWire will turn on but
WILL NOT record or turn off
Reset the device by removing the battery. Make sure
the camera module is connected to DVR before
turning on.
My FlyWire WILL NOT
record but WILL turn off
Check to make sure a properly formatted micro-SD
card is installed before attempting to record.
My FlyWire doesn't record
sound or there is
interference in the sound
Make sure a microphone is connected to Flywire and
that it is properly secured in DVR clip (or similar)
My FlyWire will only record
for a brief moment
Make sure the SD card installed is not full. FlyWire
will exit recording mode upon detecting a completely
filled SD card.
My FlyWire will turn itself
off automatically
FlyWire will automatically save the current video file
and power off when the batteries are fully
discharged. This is normal and requires a charged set
of batteries to be installed to continue recording.
My FlyWire WILL NOT
connect with USB and WILL
NOT turn off after
connecting to computer
FlyWire uses a universal USB driver compatible with
most PC and MAC. However if FlyWire does not
connect properly, unplug from PC or MAC and remove
battery to reset the device. It is recommended to
use a micro-SD card reader for downloading video if
USB connection is unavailable.
Connect camera first
Install SD card
Yellow LED will indicate
proper USB connection
Troubleshooting Guide:
