WE-EF KTY234, Инструкция по установке и обслуживанию

Страница: 1 / 20

Surge Protection
F or comprehensive protection of a luminaire installation against lightning and
electrical surges, it is essential to cover mains supply and data input lines at
the distribution board level, by using respective primary (Type 1) and
secondary (Type 2) surge arrestors in compliance with EN61643-11/
IEC61643-1.
Warning
Ensure that all required surge protection measures are in place and activated
prior to luminaire installation. Also, disconnect luminaires before operating
high-power devices such as, for example, electrical arc welders.
Do not open during installation
This product is factory-sealed.
Refer to the instructions contained in this
document for details.
Installation tools
Mounting hardware used on this product
includes fasteners with hexalobular socket
heads (ISO 10664). Installation requires the
use of matching tools.
Bollard
WE-EF LIGHTING
Installation and Maintenance
Instructions
INSTALLER
HOTLINE
+61 458 933 399
7am – 7pm AEST
KT X 234 LED
KTY234 LED
ZFY230 LED
CFY2 59 LED