WE-EF ETV13-CC/TW Series, Руководство пользователя

Страница: 20 / 54

20
SYSTEM WIRING
DMX BEST PRACTICES
•
A DMX UNIVERSE CONTAINS 512 CHANNELS ( ENOUGH FOR 128 INDIVIDUALLY ADDRESSED RGBW, 256 TUNABLE WHITE,
OR 512 SINGLE-CHANNEL FIXTURES), PLAN ADDRESSES AND DMX LINES ACCORDINGLY.
•
THE MAXIMUM DMX RUN LENGTH ALLOWABLE IS 1000FT ( 300M ).
•
THE MAXIMUM AMOUNT OF FIXTURES ALLOWABLE ON A SINGLE DMX LINE IS 30. IF MORE FIXTURES ARE REQUIRED, A
DMX BOOSTER SHOULD BE USED AFTER 31 FIXTURES.
•
THE LAST FIXTURE IN A RUN, AS WELL AS ALL DMX SPLITTERS/BOOSTERS REQUIRE A 120
Ω RESISTOR TO PREVENT DMX
SIGNAL REFLECTIONS. THE RESISTOR IS PLACED BETWEEN THE DMX+/- OUT LEADS.
•
USE PROPER DMX CABLE FOR WIRING IN-BETWEEN JUNCTION POINTS.
•
ALL DEVICES ON A DMX LINE MUST BE RDM ( REMOTE DEVICE MANAGEMENT ) CAPABLE TO ALLOW FOR BI-DIRECTIONAL
COMMUNICATION BETWEEN THE CONTROLLER AND LUMINAIRES.
•
‘Y’ LEADS OR DAISY-CHAIN CONNECTIONS ARE NOT ALLOWED BY THE USITT/PLASA STANDARD, ALL DMX CONNECTIONS
SHOULD BE IN SERIAL AS SHOWN IN THE DMX WIRING DIAGRAM.