4
Phase One
Blockout Installation Procedure
(during earth or masonry work)
1) Ensure a suitable recess is provided to accommo-
date installation blockout/mounting ring assembly
B
/
M
.
2) Set installation blockout/mounting ring assembly
B
/
M
in position and ensure that:
a)
Arrow
R
on mounting ring
M
is pointed towards
the object to be illuminated (wall, tree, column).
b) Mounting ring
M
LVƃXVKZLWKVXUIDFH
F
. If the
ƃRRUZLOOEHWLOHGRUSDYHGDIWHUZDUGVOHDYHDQDS
-
propriate gap.
c) Mains supply cable(s)
O
LVRIVXIƂFLHQWOHQJWKWR
connect sealable junction box
J
with terminal cable
E
from luminaire housing
A
.
3) Select appropriate installation blockout holes
S
(at the corners of installation blockout
B
). Peel-off
sticker(s) and feed mains supply cable(s)
O
through
installation blockout holes
S
.
4) During ongoing earth and/or masonry works, do
QRWUHPRYHVWLFNHUVRQƂ[LQJWKUHDGKROHV
D
.
Ensure that installation blockout/mounting ring as-
sembly
B
/
M
is not damaged and has maintained
its original shape. If necessary use a cover plate.
Phase Two
Luminaire Installation and Electrical Connection
5) Switch off mains electrical supply.
6) Check that rating shown on luminaire label con-
forms with mains electrical supply.
7) Terminate cable
E
(from luminaire housing
A
) and
mains supply cable
O
in sealable junction box
J
(or: two mains supply cables
O
, if through wiring is
required). For termination details, refer to separate
instruction sheet as provided with junction box.
8) Set cables and sealable junction box
J
inside
installation blockout/mounting ring assembly
B
/
M
.
3HHORIIVWLFNHUVRQƂ[LQJWKUHDGKROHV
D
. Loosen
countersunk screws
C
(do not turn out). Insert
mounting lever
L
between head of countersunk
screws
C
and cover lens. Place luminaire housing
A
into installation blockout/mounting ring assembly
B
/
M
(Fig. III) while aligning holes
D
on mounting
ring
M
.
Warning
: When luminaire housing
A
is placed in-
side installation blockout
B
, ensure there is no
stress on seal able junction box
J
or electric cables
(Fig. IV).
10) Tighten countersunk screws
C
‘hand-tight’.
Содержание ETC339-FS LED
Страница 2: ...1 Inground Luminaire EVC339 FS ETC339 FS IP67 Class I ta 25 C...
Страница 6: ...5 Fig IV Fig III...