WE-EF ETC130-GB-CC/TW, Руководство пользователя

Страница: 7 / 54

7
SETUP
INSTALLATION
FLC200
SCREW TORQUE
M4 MAX. 17.7 IN-LB (2NM)
M5 MAX. 35.4 IN-LB (4NM)
M6 MAX. 53.1 IN-LB (6NM)
M8 MAX. 133 IN-LB (15NM)
M16 MAX. 885 IN-LB (100NM)
1. SWITCH OFF MAINS ELECTRICAL SUPPLY.
2. PRIOR TO ELECTRICAL CONNECTION, PROCEED WITH MECHANICAL INSTALLATION BY FIRMLY FIXING YOKE A TO
OPTIONAL MOUNTING ACCESSORY OR DIRECTLY TO A MOUNTING SURFACE. THERE ARE 3 MOUNTING HOLES
PROVIDED ON THE YOKE FOR THIS PURPOSE, SEE DIMENSIONS IN SPECIFICATION SECTION.
3. ADJUST THE FIXTURE POSITION BY LOOSENING THE PROTRACTOR CLAMP LOCKING SCREW
H
AND THEN THE 2
MOUNTING KNOBS G ON EITHER SIDE OF THE FIXTURE.
4. TILT THE FIXTURE TO ITS APPROXIMATE AMING POSITION.
5. TIGHTEN THE MOUNTING KNOBS
G
AND LOCKING CLAMP SCREW
H
(SEE TORQUE CHART).
6. CHECK THAT THE ELECTRICAL SUPPLY CONFORMS WITH THE RATINGS SHOWN ON THE FIXTURE LABEL AND
LEADS EXTENDING FROM THE FIXTURE. MAKE THE ELECTRICAL CONNECTION INTO THE JUNCTION BOX.