WDT UP 14 Z, Руководство по эксплуатации

Страница: 36 / 71

BDA UP 14 Z – 03/15 – REV. 0 Page 36 / 71
ATTENTION
+
Place the tubes on the floor so that they do not cause a trip hazard.
+
Do not lay the foot pedal in aisles or walk ways.
+
Assure free access to the operating elements of the machine, especially the foot pedal.
+
During transport and installation of the machine wear suitable safety shoes.
INFORMATION
+
To work fatigue-proof the user has to take a working position, where the machine is in a
right height position and an acceptable usage of the foot pedal is possible. The foot pedal
has to be installed in a stable position. The position of the foot pedal should be chosen in
that way, that a free access will be possible.
6 Commissioning / Connecting to Compressed Air Supply
DANGER
+
Due to the risk of hand or finger injury, never try to reach into the machine before having
assured that the machine is disconnected from the air supply. Disconnect the air supply
before changing the safety guard and the dies.
CAUTION
+
The pneumatic Crimp Machine UP 14 Z may only be set up and operated in perfect
technical condition, observing all the safety regulations and considering any possible
dangers.
+
The crimp machine is only allowed to be used with mounted dies and safety guard.
+
The crimp machine is only allowed to be used when it is in complete functional condition.
+
When working with the pneumatic Crimp Machine UP 14 Z, do not wear loose clothing,
jewellery or long, loose hair that can get caught in the pneumatic Crimp Machine UP 14 Z.
+
Work with caution.
+
In cases of a machine malfunction, production must be stopped and the malfunction must
be fixed before continuing work with the machine.
+
Only one person is allowed to work on or with the machine.
+
Only trained personal are allowed to work on or with the machine.
+
Assure free access to the operating elements of the machine, especially the foot pedal.
+
It is only allowed to work with the specified air pressure.