WDT Soldos V3, Инструкции по эксплуатации и монтажу

Страница: 45 / 74

Brine Nebulization System, Type Soldos V3
Index: 03 Change date: 01/03/2017 Operating instructions no.: BA DW 005-03 Soldos V3 EN.docx Page 45 of 70
6.5.1.4 Reset
Press the Reset button in the Systems menu when you want to reset the controller
to factory settings.
Resetting to factory settings depends on the user level at which you are logged in.
(Factory settings see operating data sheet in
Section 9.4.)
The values of the following menu ranges are set to factory settings on
User Levels
2 and 3 :
Button operation, display and back-light, splash as well as announcement and
heater
On
User Level 5 , all passwords on User Levels 1-4 are reset, in addition to User
Level 3.
On
User Level 6 , the time and weekday settings are reset as well.
On
User Level 7,
also the product name, serial number and date and time are
reset.
On
User Level 4,
the network settings are reset.
Confirm your selection with OK to reset the software to factory settings or
terminate the process with ESC .