Wayne T50SW, Инструкция по эксплуатации и каталог запасных частей

Страница: 1 / 12

SPECIFICATIONS
POWER SUPPLY REQUIREMENTS
120 V, 60 Hz (T50SW, F50SW)
230 V, 60 Hz (200SW, 100SW, 75SW)
MOTOR
Single Phase, Dielectric Oil Filled (T50SW, F50SW)
Permanent Split Capacitor (200SW, 100SW, 75SW)
HORSEPOWER 2 HP...............( 200SW)
1 HP............... (100SW)
3/4 HP..........
(75SW)
1/2 HP.......... (T50SW, F50SW)
LIQUID TEMPERATURE
40° F - 120° F
CIRCUIT REQUIREMENT
15 A (minimum)
DIMENSIONS
16-5/8 in. high x 9-5/8 in. base (T50SW)
17 in. high x 10-5/8 in. base
(F50SW)
18 in. high x 11 in. base (200SW, 100SW, 75SW)
ON LEVEL (FACTORY SET)
Approximately 19. in.
(T50SW)
Approximately 13 in. (F50SW)
OFF LEVEL (FACTORY SET) Approximately 10-1/2 in. (T50SW)
Approximately 8 in. (F50SW)
610001-026 B 08/18
© 2018, Blue Angel/Scott Fetzer Company
CONSTRUCTION
MOTOR HOUSING Cast Iron (ALL MODELS)
VOLUTE
Cast Iron (
ALL MODELS
)
IMPELLER Glass Reinforced Thermoplastic (T50SW,
F50SW)
Cast Iron (200SW, 100SW, 75SW)
SHAFT Steel
DISCHARGE 2 in. NPT (T50SW, F50SW)
3 in. NPT supplied 2 in. Adapter (200SW,
100SW, 75SW)
Sewage Pump
www.blueangelpumps.com
PERFORMANCE
Model HP Discharge Head 5 ft 10 ft 15 ft 20 ft
T50SW 1/2
Gal / hr 7680 6600 1920 -
F50SW 1/2
Gal / hr 7680 6600 1920 -
Intended for Indoor Use Only
T50SW (Tether Float Switch)
F50SW (Vertical Float Switch)
200SW, 100SW, 75SW
Operating Instructions and Parts Manual Sewage
Please read and save these instructions. Read carefully before attempting to assemble, install,
operate or maintain the product described. Protect yourself and others by observing all safety
information. Failure to comply with instructions could result in personal injury and/or property
damage! Retain instructions for future reference.
Model HP Discharge Head 15 ft 20 ft 25 ft 30 ft 35 ft 40 ft
200SW 2
Gal / hr - - 9600 6400 4000 2300
100SW 1
Gal / hr - 9800 6300 3400 1300 -
75SW 3/4
Gal / hr - 6700 3400 1400 - -
* THE PERFORMANCE FOR MODELS
200SW, 100SW, AND 75SW, WHERE
THE SPACES ARE EMPTY THESE
PUMPS SHOULD NOT BE USED AT
THAT LIFT.
PERFORMANCE