2.Setting
In power on status, press setting button to set the humidity:
-The setting light will be on, and "
" on the digital screen will flash and
52
show the setting humidity, then you can set the humidity within a range of
30%RH to 80%RH by making the humidity setting increase by 5%RH. Long
press the setting button can continuously set the value.
-If no operation for seconds, it will exit the humidity setting status and the
digital display will show the actual room humidity. The setting light will be
off.
-When the humidity level is set at 30%RH, the dehumidifier will work at
continuous dehumidifying mode.
The timming setting function is designed for you to set a time to turn off or
turn on the machine, automatically by the timer.
1. Press the "Timing" button to select the timer by 1-hour increment. You can
set the timer up to 24 hours. It will start to do the countdown when you start
the timer.
2. If the time is set to 00, this is called the invalid time. If you set the timer
successfully, the Timing light " " will be on. The LED screen will show the
remaining time if you press the "Timing" button, and display the current
humidity automatically after a few seconds.
Control the fan speed. Press to select either High or Low fan speed. Higher
fan speed will result in quicker moisture removal. Set the speed high for
maximum moisture removal. When the humidity has been reduced and
quiet operation is more preferred, set the fan speed back to Low.
OPERATION INSTRUCTIONS
