The power indicator will be off/on when the machine is powered off/on and flash
if the machine is in "delay on" Status.
When the current humidity reaches the setting value, it will stop dehumidification
(just maintain the humidity value), the "
" on digital display and the power
52
light will flash.
If you set the speed to high speed fan mode, the high speed indicator will be on;
if you set the speed to low speed fan mode, the low speed indicator will be on.
Defrosting light will flash if in defrosting status, and vice versa.
When the water thank is full of water, the water full indicator light will flash.
4. Faults & Processing Methods
Fault Phenomenon
Analysis of Causes
Processing Method
Humidity sensor failure?
Set the humidity to 30%RH, the
dehumidifier can still continue to
work, and can be used normally.
Repair and replace the humidity
sensor.
1. Water on the surface
of the humidity sensor?
2.Humidity sensor failure?
The dehumidifier is not affected
and can continue to work, and
can be used normally.
Repair and replace the humidity
sensor.
Please let the dehumidifier keep
working for a period of time,
after the water on the surface of
humidity sensor is removed, it
will return to normal.
Humidity always shows
"25%RH"(There is a big
difference from the actual
humidity)
Humidity always shows
"99%RH"(There is a big
difference from the actual
humidity)
3. Display Status Description
OPERATION INSTRUCTIONS
contact Waykar
Customer Service at
for help.
Note:
Before starting the machine, please ensure that the air outlet has been
opened, otherwise the machine will overheat. Do not pull out the pöwer
cord directly to stop the machine.
