![background image](http://html1.mh-extra.com/html/wavion/ws410/ws410_installation-manual_3896891036.webp)
Installing the Wavion WS-410 Metro Access Point
36 Wavion
7.
Connect the cable ends on the WS-410 to the ETH A port or to the ETH B port if you are
using a backhaul unit that requires a power supply. Use a shielded RJ45 8-pin modular
plug to terminate the cables at the desired lengths.
8.
Make sure that the protection unit is properly grounded.
9.
Apply silicon across the rubber plugs.
10.
Close the strip and tighten the bolt using the 4mm Allen wrench.
11.
Close the connector access cover and tighten the bolts using the 4mm Allen wrench. This
ensures a watertight seal.
ETH A port
ETH B port
Содержание WS410
