![background image](http://html1.mh-extra.com/html/wavion/ws-410ad/ws-410ad_installation-manual_878220025.webp)
Installing the Wavion WS-410 Metro Access Point
Installation Guide
25
3.
Attach #10 AWG bare copper wire with an M6 terminal ring to the grounding screw.
4.
Attach the second star washer and tighten the nut.
5.
Attach the other end of the grounding wire to a grounding strap that is attached to a
grounded surface or other earth ground (for example, a grounding rod).
Grounding the Data Protection Device
The grounding method for an indoor data protection device is shown in
To ground an indoor data protection device
1.
Position the protection device as close to the entrance of the building entrance as possible.
2.
Attach a length of #10 AWG bare copper wire to the ground post on the data protection
device.
3.
Attach the other end of the grounding wire to the ground connection of an electrical outlet
or a grounded water pipe.
Attach wire to
grounding
screw
Содержание WS-410AD
