Wavion WCPEn-2400-I, Быстрый старт

Страница: 15 / 18

WCPEn 1.0 User Guide Page - 15 -
4. In Configuration => Wireless => Wireless Settings go to the Security Settings section, and
specify the security mode according to your system requirements (see the below table).
3.1.4 Security Settings
Security Mode Values
Open No security applied
WEP
Simple WEP security (64 or 128 bit hardware key)
Modes:
 Open Key
 Shared key
Indicate which key is primary – 4 options
WPA
Enhanced security for personal enterprise Available options:
MODE  WPA
 WPA2
 Auto
CYPHER  TKIP
 CCMP
 Auto
Pre-Shared Key Enter a pre-shared key, required field. 8-63 characters.
Enterprise/Radius
support  AUTH Server
 Port
 Shared Secret
3.2 General Administration Tasks
The following procedures describe how to upgrade the current firmware, as well as how to restore
settings to the default or previously defined settings.
3.2.1 Firmware Upgrade
The firmware upgrade capability enables you to upgrade your system firmware, or to rollback to a
previously saved version.
1.
In the WCPEn-2400-I management interface, navigate to Administration => Firmware Upgrade .
2. Browse to the location in which the upgrade file is located.
3. Click Upgrade .
3.2.2 Restoring Settings
You can back-up your current configuration settings, for example, for maintenance or troubleshooting
purposes. You can also use this backup to restore your system configuration settings to those previously
defined, in the event of a problem.
1.
In the WCPEn-2400-I interface, navigate to Administration => Backup/Restore Settings .
2. To back up the configuration settings, click Backup .