WCPEn 1.0 User Guide
Page - 11 -
Note:
Once your system powers up again, you can check that the correct operation mode has been
activated, by navigating to
Status => Wireless Settings => Operation Mode
, as shown below:
4.
You must define two Virtual AP (VAPs) for Dual Zone Bridge Operation Mode. VAP1 is the VAP which
connects to the outdoor base station, and VAP 2 is the VAP signal to WCPEn-2400-I.
5.
To specify the first VAP, navigate to
Configuration => Wireless => Wireless Setting.
6.
Click the
VAP1
tab, and click
Scanning
. A list of available access points is displayed.
7.
Select the required access point and click
Connect
.
Note:
If indicated in the list of access points that security settings need to be configured, click
Security Settings:
a.
Enter the SSID string of your home system.
b.
Specify the security mode according to your system requirements. For more information, see the
