Wavion WBSn-2400, Руководство пользователя

Страница: 25 / 42

WBSn-2400 User Guide Page - 25 -
3. Complete the fields according to the parameters described in the table below.
Parameter Description
IP Address Specify the IP address
IP Method Values:
Manual (statically assign an IP address to the VLAN)
DHCP: The DHCP server dynamically assigns an IP address to the VLAN
Mask Specify the default subnet mask
Gateway Specify the system default gateway
MTU Range of size that a packet can be
VLAN configuration
WBSn implementation distinguishes between network parameters (VLANs) and wireless parameters, such
as VAPs. A maximum of 4096 VLANs can be configured on WBSn.
Once you have configured the VLANs, you will then map them to different wireless parameters, to
achieve different capabilities according to your requirements.
You can also configure one VLAN as the Management VLAN in the WBSn-2400 system. The purpose of
this is to segment the Management and the Clients data traffic. It also provides an option for customers
to keep an Open SSID for public traffic and simultaneously manage the WBSn-2400 traffic over a
separate VLAN (that can be linked to a secured SSID). The management VLAN can be selected out of the
enabled VLAN list.
To Configure a VLAN
1. To specify a new VLAN, navigate to Configuration => Network => Bridge.
2. Expand the VLANs Configuration window, and click Add (or Edit) to configure the VLAN
Parameters. A pop-up box with the following parameters is displayed.
Parameter Description and values
VLAN ID This ID should be unique and must be supported by the backbone equipment
that is connected to the WBSn through the Ethernet port.
VLAN Name Edit the VLAN name as required.
Ethernet Determine whether the VLAN is configured in the Ethernet interface, and
define whether it is tagged or untagged.
VAP 1-6 Determine whether the VLAN is configured in any of the VAP interfaces and
define whether they are tagged untagged, or none.
3. Scroll back up to the VLANs section, and specify a VAP for the VLAN.
Once you have at least one VLAN defined, you can then specify the Management VLAN .
Tagging VLAN
When configuring more than one VAP per WBSn unit, a VLAN can be created. Each VLAN should be
tagged with a different VLAN ID so that networks can be identified at backbone entry.
The default VLAN has a VLAN ID that is equal to 1, and has tagging disabled by default, leaving the data
untagged.