Wavion WBSn-2400, Руководство пользователя

Страница: 24 / 42

WBSn-2400 User Guide Page - 24 -
To Access Automatic Channel Selection
1. Select Configuration => Wireless => Radio.
2. Expand the required field (Online ACS or Offline ACS) to specify the parameters, described in the
following table.
Parameter Description
Offline ACS
Select Channel button
Click to select a specific channel
Scan Click to scan, then define the following parameter values:
•
Optimization mode:
o
Throughput
o
Range
• Auto Switch
• On
•
Off
•
Estimate Scan Time (specify)
Stop Scan button Stops scan
Online ACS (To be available in a future release)
Optimization mode
Values:
• Throughput
• Range
Auto. Switch Switches Online ACS on and off automatically
Enable/Disable Select whether or not to run online scanning.
Network/Ethernet Interface – Setting up WLANs
A WLAN is the combined entity of VAPs and VLANs. Each VLAN has a unique IP address, which you must
configure.
It is possible to create several networks that work in parallel on the same WBSn-2400. This can be done
by creating several VAPs mapped to several VLAN. Each VAP will represent a different broadcast domain
on the wireless interface, isolated from other VAPs by using different broadcast keys, with the broadcast
domains on the Ethernet interface separated by the VLAN.
To Configure the Default IP
1. Navigate to Configuration => Network => IP Configuration to specify the default IP for your
VLAN.
2. Click Add (or to specify an existing IP configuration, click Edit). The following dialog is displayed: