Managing Network Interfaces
53 Wavion
Cluster deployment in steps:
Step 1:
Configure the same passphrase to all Cluster BST- Please refer to the configuration steps
(pages 41-44).
Step 2:
Install Central BST
Run ACS on Central BST to select the best channel
Set Channel
Step 3:
Install Remote-BST
Run Remote-Scan
Select the desired Central BST by click on entry in table.
Remote 1 will reboot in the desired channel with proper configuration
Step 4:
Execute Central-Scan and add Remote units to Central-BST
Central Configuration
1.
Set the BST role to Central
2.
The page will change automatically to Central BST configuration page.
3.
Configure the Network parameters
4.
Logical network ID
5.
Cluster ID
6.
Configure the Remote base stations
7.
Enter passphrase.
8.
Set the Operational channel
9.
Set the Range between BST or between the farthest client and the BST.
