wavin NeoStat, Руководство пользователя

Страница: 24 / 32

Wavin neo Wavin neo
24 23
Re-calibrating the Thermostat
If you need to re-calibrate the thermostat, follow these steps.
Use the Left / Right keys to scroll to the Power Icon ............................ •
Press and hold Tick to turn the display OFF ........................................................... •
Press and hold the Tick and Down keys together for 10 seconds .................. •
The current temperature will appear on the display. •
Use the Up / Down keys to configure the new temperature value .............. •
Press the Tick key to confirm the change and the display will go blank .... •
Press the Tick key once to turn the thermostat ON ............................................ •
Error Codes
E0 = The internal sensor has developed a fault.
E1 = The remote FLOOR probe has not been connected.
The remote FLOOR probe has not been wired correctly.
The remote FLOOR probe is faulty.
E2 = The remote AIR probe has not been connected.
The remote AIR probe has not been wired correctly.
The remote AIR probe is faulty.
When terminated for thermostat operation the screen will display an error code if a fault
is detected.
Factory Reset
To reset the device to factory default settings, follow these steps:
Use the Left / Right keys to scroll to SETUP ........................................................... •
Press and hold the Tick key for 10 seconds ........................................................... •
All of the icons on the display will appear for 2 seconds, then the display •
will show option 1 or 2.
Use the Left / Right keys to scroll between modes (selection will flash) .... •
Mode 1 = Thermostat
Mode 2 = Time Clock
Press the Tick key to confirm selection .................................................................... •
The thermostat will revert to the main display screen for the selected m ode.
Note: Factory reset will cancel all parameters that were entered during the set-up and
pairing operations. These processes must be repeated after factory reset is completed.
50110_HM-neoStat-2014_Layout 1 31/10/2014 11:33 Page 24