Wavin neo
Wavin neo
16
15
Locking the neoStat
The thermostat has a keypad lock facility. To activate the lock follow these steps.
Use the Left / Right keys to scroll to HOLD & press Tick for 10 seconds.
•
The display will show 00:00 and you will need to enter a four digit pin number.
•
Use the Up / Down keys to enter the first two digits .......................................
•
Press Tick to confirm .............................................................................................................
•
Use the Up / Down keys to enter the second two digits ................................
•
Press Tick to confirm ............................................................................................................
•
The display will return to the main screen and display the keypad lock indicator ....
Note: The keypad lock indicator is only displayed when the lock is active.
Unlocking the neoStat
To unlock the neoStat press Tick once. The display will show 00:00 and you will need to
enter the four digit pin number you set previously.
Use the Up / Down and Tick keys to enter the first two digits ............
•
Use the Up / Down and Tick keys to enter the second two digits .....
•
The display will unlock and return to the main screen.
Use the Left / Right keys to scroll to the Power Icon .............................................
The frost icon will toggle ON/OFF each time Tick is pressed ..................................................
In this mode, the neoStat will display the frost icon and will only turn the heating
ON should the room temperature drop below the set frost temperature (see page 23).
If the heating is turned ON whilst in frost mode, the flame symbol will be displayed.
To cancel the frost protect mode, navigate to the Power button again and press Tick.
Frost Protection Mode Enabled
Frost Mode
50110_HM-neoStat-2014_Layout 1 31/10/2014 11:33 Page 16