EuroPEK Filter -
Oil Separator
24BI01ae
WAVIN-LABKO LTD
5
of belts. Instructions for belt dimensioning can be found e.g. on the Wavin-Labko web
pages
www.wavin- labko.fi
.
In easy corrosion environments (calcareous or sandy soil, gravel, loamy sand, soil layers
above ground water surface which pass air well or relatively well), electroplated zinc
coated ratchets can be used to tighten the belts.
In highly corrosive environments (clayey soil, humus, peat, slag, mud, sulphides,
ground water level fluctuation zones as well as coast areas), stainless ratchets are
recommended.
Tanks of diameter 1 m are anchored by tying the belts tightly onto the lugs on the slab.
The nominal capacity of each belt should in this case be at least 2000 kg. Tanks the
diameter of which exceeds 1 m should always be anchored with belts that are tightened
by means of ratchets. In this case, also the nominal capacity of the belt should be
higher:
-
tank diameter 1,4...2,2 m, easy corrosion environments; nominal capacity 4000 kg,
electroplated zinc coated ratchets and hooks,
-
tank diameter 1,4...2,2 m, highly corrosive environments; nominal capacity 2500 kg,
stainless ratchets and hooks,
-
tank diameter 3,0 m; nominal capacity 4000 kg, stainless ratchets and hooks.
The anchoring belts are available as accessories at Wavin-Labko.
2.3.2
Maintenance shaft
The maintenance shafts EuroHUK 600 and LM-HUK and the cast iron cover and frame
5…40 t
are available as accessories for the oil separator EuroPEK Filter. The gaskets
enable a watertight installation of the maintenance shaft s. The type of the maintenance
shaft is selected according to the installation depth of the separator, as presented in the
following table:
Type of the maintenance shaft
9-13
13-17
17-21
21-25
From inlet sewer to ground surface (mm)
900-1300
1300-1700 1700-2100
2100-2500
2.3.3
Cast iron cover and frame
The cast iron covers and frames of the maintenance or sampling shafts are chosen
according to the traffic load above the separator system (5, 25 or 40 t).
2.3.4
Data transferring unit Labcom
The Labcom data transferring unit can be attached to a SET alarm system, e.g. to the
alarm unit SET/Omega. The data transferring unit Labcom enables the alarm, e.g.
indicating the need to empty the oil storage space, to be automatically forwarded to the
person or company responsible for the task.
By using a user name and a password, the customers can read the data concerning their
property on the Internet. The data can also be transferred as an SMS to a GSM phone or
as an e- mail to a computer. The modem and phone line need not be kept open at the end
being monitored.
