Redundancy Controller
Page
6
Document Number: 90-005-0030_E
Safety
Because the RMC can be used in close proximity to amplifiers, caution must be exercised when
working close to amplifiers and waveguides
The equipment contains delicate electronics and electrical components. Carefully read and follow all
safety, use, and operating instructions before operating the equipment. Retain these instructions for
future reference.
Safety Precautions
C A U T I O N
Electrostatic sensitive.
There are devices in the unit that are easily damaged by ESD.
Take standard ESD precautions.
Operation Precaution
C A U T I O N
Connect to feed and antenna before applying power.
Do not apply power until the SSPAs or BUCs are appropriately
connected to the feed and antenna system.
D A N G E R
Shock Hazard.
Do not open the unit. High voltages are present inside the unit.
Service may only be performed by Wavestream.
There are no user serviceable parts. Do not attempt to service
this product yourself. Any attempt to do so void any and all
warranties.
W A R N I N G
High Power RF Hazard.
Do not operate unless RF output waveguides are properly
connected to the rest of the system or to a high power load.
W A R N I N G
Grounding.
To protect against voltage surges and built-up static charges,
install the unit using appropriate grounding methods in
compliance with grounding standards for electrical and radio
equipment according to the electrical codes in the country of
installation.
!