Redundancy Controller
Page
23
Document Number: 90-005-0030_E
ENTER
BACK
HOME
Quick Navigation
1.
Press
Home
to return to the Monitor/Home position
2.
Press
Enter
to access the Menu/Control.
3.
Use the arrow keys to select a submenu, press
Enter
to access it.
4.
Press
BACK
to return the menu screen that was just displayed.
Change the SSPA-A/B Settings
Select SSPA-A or SSPA-B
1.
From the Monitor/Home position press
Enter
to access
Menu/Control.
2.
Use the arrow keys to select a submenu.
> < around a line indicates which choice will be selected.
In this example SSPA-A will be selected when you press
Enter
.
Example:
Change parameter(s). For example to decrease the attenuation:
1.
Press
Home,
select
SSPA-A
, and press
Enter
.
2.
Select
SET ATTENUATION
. Press
Enter
.
3.
Use the arrow keys to select increase/decrease the attenuation.
Press
Enter
for your selection (for this example increase the
attenuation by +2.
4.
Press the
Home
key to return to the SSPA-A Home menu. Use the
arrow keys to select
SAVE UNIT SETTINGS
. Press
Enter.
Your changes will be saved.
NOTE: if you do not save your
settings then whenever the unit is power cycled it will revert
to the original settings
.
ENTER
BACK
HOME
ENTER
BACK
HOME