VL53L0X Distance Sensor User Manual
Version: V1.0.0, Date: 2018.06.27
11
WORKING WITH STM32
HARDWARE CONNECTION
This connection is based on XNUCLEO-F411RE/ NUCLEO-F401RE
：
VL53L0X Distance Sensor
XNUCLEO-F411RE/NUCLEO-F401RE
VCC
3.3V
GND
GND
SDA
SDA
SCL
SCL
RUNNING VL53L0X_GUI
1.
Connecting sensor to NUCLEO-F401RE board as
Hardware connection
above
2.
Install ST
’
s VL53L0X_GUI software and run it. The software will write the test
firmware to NUCLEO board automatically. (
Note: for this example, you need to
use the NUCLEO-F401RE development board, and it is not an open-source
code
)
3.
Switch to Low-Power Automous, Distance Mode choose Short, then click Start.
Distance curve will be showed on the software
