Axis Scope and Axis Proton / Quick Start Guide
5
Setup Guide
Follow these steps to prepare your Axis computer for operation with Waves applications.
H
ARDWARE
C
ONNECTIONS
1. Connect the power cable to mains for the computer and all devices. All SoundGrid hardware devices must be
grounded (earthed) according to local regulations.
2. Connect the keyboard and mouse.
3. Use the LAN Ethernet port to connect to your LAN.
Do not use this port for the SoundGrid network.
4. Connect the WSG port to the SoundGrid network 1Gb switch. Reserve this port for SoundGrid only.
5. Connect up to two displays to the video ports. There are one HDMI port and one DisplayPort.
6. If you’re using touch screen displays to control the application, connect USB cables between the computer and each
display. Install the relevant display drivers, and refer to display’s user guide for details.
D
ISPLAY
S
ETUP
In this example, we will configure an Axis computer with an eMotion LV1 mixer.
1. Calibrate the screen for touch input with the Tablet PC Settings in the Windows Control Panel.
2. When using more than one display, you will likely want to see a different application window on each display. To
“tear off” a window in eMotion LV1, grab a window tab at the top of the page and drag it down. The detached
window is now a freestanding panel that you can move to any display.
Refer to the eMotion LV1 user guide to learn more about floating windows.
