P600 Lift
- User Guide
Rev: 31MAY2011
Page: 11
Mounting the lift to the track
Figure 8A - Photo showing con-
nection of lift hook directly to
the eyelet of the trolley.
Figure 8B - Photo showing close-
up of lift hook connected directly
to eyelet of trolley.
Figure 10A - Photo of lift hook
connected to a
P-600
lanyard
first and then to the eyelet of
the trolley.
Figure 10B - Photo showing
close-up of lift hook, lanyard and
eyelet of trolley.
The first step in being able to use the
P-600
lift is to mount it onto the trolley of the lift track.
There are several ways of making this connection. Refer to figures 8A through to 11B to determine the type of
ceiling connection that has been installed with the purchased system.
Figure 11A - Photo showing lift
hook connected to a reacher &
lanyard and finally to the eyelet
of the trolley.
Option 1 - Direct connection to trolley
Option 2 - Connection with reacher
Option 3 - Connection with lanyard
Option 4 - Connection with lanyard and
Reacher arm Carabiner.
Caution: Always check to ensure that the lift hook is attached properly to the eyelet of the trolley, or
the reacher, or the lanyard. The safety latch of the lift hook must always be in a locked position as
shown in the close-up photos 8B, 9B, 10B and 11A.
Figure 9A - Photo showing
P-600
lift carabiner connected to a reacher
first and then to the eyelet of the
trolley.
Eyelet of trolley
Reacher
Arm
Lift
Hook
Lanyard
Eyelet of
trolley
Lift Hook
Lift hook
Eyelet
of
trolley
Trolley
Reacher
Lanyard
Lanyard
Carabiner
Figure 9B - Photo showing close
up of
P-600
lift carabiner con-
nected to a reacher first and then
to the eyelet of the trolley.
