Wavelet 16-ch Digital Video Recorder, Инструкция по эксплуатации

Страница: 44 / 152

WAVELET DIGITAL VIDEO RECORDER
43
2. MOTION RECORDING
Please verify that the motion feature has been enabled under record setup menu Also,
verify that the appropriate post recording duration has been configured under the event
setup menu. The motion grids are all activated by default, thus, unless it has been
deactivated, the motion grid setting may be ignored.
Press the record button and the record icon will
appear as shown on the left. The record LED will
start blinking as it is set to the standby mode until
motion detection is triggered. The DVR is not
recording as long as the record LED is blinking.
When a motion is detected, the record LED will
turn solid. The motion recording icon will appear
on the screen and the DVR will record for the
duration of the post record duration.
The record setup allows the DVR to use a combination of both features.