Wavecrest OE-2, Руководство пользователя и справочное руководство

Страница: 19 / 39

Manually Assigning GPIB Addresses
The
GPIB Address Assignment
window will appear (see figure below). The fields in this dialog
box will be blank unless device assignments were previously made. The
GPIB Address
Assignments
dialog box manages the address settings for both the GPIB host and all
OE-2’
s.
Optical Configuration Dialog Box – GPIB Address Assignment
The
Optical GPIB Board
field controls the host GPIB address, that is, the GPIB address of the SIA
controller or host controller computer. In most installations, this will be set to 0. In cases where a
host computer has more than one GPIB interface bus connected to it, the
Optical GPIB Board
address should be set to the card address for the bus connected to the
OE-2
’s.
The
Optical GPIB Device
field sets the address of the
OE-2
’s connected to the GPIB bus. Set
the
Optical GPIB Device
to the DIP switch setting on the back panel of the
OE-2
and select the
Add Device
button. The
OE-2
address will appear in the
Remote Device List
. In the case of
multiple
OE-2
installations, each remote device will have to be individually added.
The default address for the
OE-2
is 6.
The
Device Name (UNIX Only)
field is not used at this time.
Automatically Assigning GPIB Addresses
To automatically assign GPIB addresses, click on the “OE Device Search” button to have
VISI
automatically search the GPIB network and identify all connected
OE-2
’s. In addition, clicking
on this button will bring up a pop-up box that asks if existing configurations are to be deleted.
Select the appropriate response.
Section 3 | Setup and Measurement |
11