Wavecrest OE-2, Руководство пользователя и справочное руководство

Страница: 18 / 39

VISI
SOFTWARE SETUP
Controller Mode
Edit | Configuration Menu
In order for the
OE-2
to communicate with the
SIA-3000™
using the GPIB bus, the
SIA-
3000
must be in the “Controller” mode. To select Controller mode:
Select
Edit Configuration
on the
(pull-down) Menu Bar
Select
OE-2
in the Target
Device pull-down Menu
Select Controller in the GPIB
Board Mode pull-down menu.
Click “Apply”
Click “Close”
Optical Configuration
The
Optical Configuration
menu enables the user to:
•
Set up the IEEE-488 (GPIB) addresses for one or more
OE-2
’s (up to five
OE-2
’s can
be addressed in a single
VISI
-based system).
•
Assign each
OE-2
channel to a
WAVECREST
SIA
or DTS instrument channel.
•
Set preliminary optical measurement parameters.
To access the
Optical Configuration
menu in
VISI
, select
Edit|Optical Configuration
on the (pull-
down) Menu Bar (see figure below).
| Section 3 | Setup Measurement
10