Wavecrest OE-2 Скачать руководство пользователя

Страница: 17 / 39

SECTION 3 – Setup and Measurement

This section describes the set-up of the

OE-2

and provides instructions that enable the user to

take a quick measurement for rapid familiarization with the instrument.
In addition, this section describes the

Virtual Instrument Signal Integrity™ (VISI)

software tools

necessary for using the

OE-2

with any

WAVECREST

measurement instrument. Please refer to

the

VISI

User’s Guide for detailed definitions and instructions of this and other

VISI

tools.

Test System Requirements

To use the

OE-2

, a complete test system consisting of the following components is needed:

•

WAVECREST

OE-2

•

WAVECREST

SIA

or DTS (PC or Workstation with

VISI

installed) instrument

•

A source of optical signals

•

Interconnecting cables

Before attaching any connector to the

OE-2

, clean

all

optical connections using

an optical fiber connector cleaner such as the NTT-ME CLETOP.

To prevent damage to the optical-to-electric (O/E) input connector, a build-out connector is
included with the

OE-2

. The build-out connector can be replaced if it becomes damaged or dirty.

A dirty or scratched O/E input connector can severely degrade the input signal, resulting in
inaccurate measurements.

NOTE

: If the O/E input connector is damaged, the instrument must be returned to

WAVECREST

for repair.

Before Using the

OE-2

To ensure the highest accuracy and proper GPIB operation, it is important that:

All

OE-2

’s are warmed up for

at least ½ hour prior to taking a measurement.

All

OE-2

GPIB addresses have been correctly assigned (see page 8).

An external calibration of the

OE-2

is performed at least once each day (see page 12).

The

OE-2

should also be recalibrated if there has been a change of more than 5 C° in

ambient temperature.

Instrument Setup

Attach the power cord to the back of the instrument and to an appropriate power source.
See Appendix A for specific power requirements.

Attach the cleaned build-out connector to the

OE-2

input.

Attach the cleaned input signal cable to the build-out connector.

Turn on main power on the back of the unit.

Turn on front power switch. The front switch is typically used for daily operations and
also allows easy access to power if the unit is mounted in a rack.

Section 3 | Setup and Measurement |

Содержание OE-2








































Результаты поиска

Содержание OE-2

Отзывы:

Похожие инструкции для OE-2

Бренды по названию

Популярные бренды

Wavecrest OE-2, Руководство пользователя и справочное руководство

Результаты поиска

Содержание OE-2

Отзывы:

Похожие инструкции для OE-2

Бренды по названию

Популярные бренды