WAVECONTROL MonitEM-Lab, Руководство пользователя

Страница: 14 / 28

5.2.4 Actions
• Update values: When any value is modified, this field is displayed in yellow,
indicating that this value has not been updated on the device. Pressing the
button will update the values.
• Restart unit: This allows, for example, going from USB mode to normal mode
when the general power supply is connected following a USB connection,
or to read from a probe that has been connected after the device has been
connected to the power supply.
• Refresh values: Reread the data for the device, e.g. time, temperature.
• Download measurements: Download the measurements saved in the SD
when in offline mode.
• Test Communication to server: Allows checking to see if the communication
parameters are correct with the Wavecontrol Control Centre web server.
A new screen will open to start the check. If the check is successful, it will
show that the server has accepted the communication.
5.2.5 Online mode (not compatible with ModBus TCP/IP protocol, see 6.2)
In this mode (checkbox "Send data to control center" ticked), the device
will transmit at intervals to the server. In this mode, the device will also send
warnings in the event of an alarm (for the alarms that are activated).
The measured data can be viewed directly from the Control Centre. The
recording interval and the communication interval can be changed from the
Control Centre. See the Manual for the Control Centre for further information.
Note: the "online mode" is only used to connect to the Control Centre. Deactivate it
when MonitEM Reader is used to connect with ethernet to the MonitEM-lab .
User’s Manual
Electromagnetic Radiation Monitoring Device MonitEM-Lab P. 12