Above the water areas that typically require more attention are those near pool
equipment, landscape features such as walls, rocks and dense vegetation.
In the water areas that typically require more attention are around metal ladders, dock
floats or pilings, and features such as raised walls, large rocks, waterfalls, and dense
vegetation.
NOTE: If there are areas in the water that cause a false Dangerous Submersion Alert
when the wearable is not submerged, it is then necessary to find an alternative
location for the w10 or address any object(s) that may be causing the issue.
If the system is moved repeat the above test until you are completely confident that
the entire swim area is fully covered
.
ACTIVE MONITORING
After successfully confirming that the system completely covers the swim area, you are now
ready to start using your w10 for active monitoring.
1.
Power on the w10 using the Start Up Process.
2.
Use the w10 Management App to change/confirm settings
3.
Check for system notifications and take any required actions as necessary.
4.
Distribute only ENABLED wearables to all swimmers and non-swimmers.
WAVE w10 Swimmer Safety System User Guide v0721-1
Page of
22
27
