I. INSTALLING THE SPEAKERS
Step 1:
Use the speakers to choose the ideal placement. Using masking tape, place each of the speakers in their
desired location. You can verify placement by sitting on your watercraft.
Step 2:
Using additional pieces of masking tape, draw aligning
marks on the tape on the front of the speaker and on the tape on
the watercraft as shown in the photograph at the right. Repeat on
the other side of the watercraft.
Step 3:
Remove the
speakers from the
watercraft, including
the marked masking tape on the speakers. The marked masking
tape for the front and back of each speaker should remain on the
watercraft.
Step 4:
Peel the backing tape from the VHB adhesive strip and
attach to the mounting cleat, still securely inside the speaker.
Do
not touch the adhesive strip with your hands
, as this could
lessen the strength of the bond. Continue through Step 9 on one
side of the watercraft, before moving onto the other side.
Step 4a:
If using the mounting cleat adapter, peel the tape on the adhesive
and attach the adapter to the mounting cleat. Then apply the VHB
adhesive to the adapter.
