Clutch Kit (A18084) Installation Instructions
Clutch Kit (A18084) Installation Instructions
Document number: 84105
-3
Date: August 2001
3. Turn the clutch knob either 4 clicks clockwise to tighten the
clutch, or 4 clicks anti-clockwise to loosen the clutch.
4. Use the allen key to re-tighten the clutch knob screw.
5. Check that the wheel still moves freely with the clutch off.
Note: If the wheel does not move freely, reduce the clutch tension by
turning the clutch knob 2 clicks anti-clockwise and check again
6. Check the drive’s operation with the clutch engaged.
This procedure is usually sufficient to correct a slipping or dragging
drive belt. In some cases, however, you may need to repeat the steps
to adjust the clutch further.
4000 mk2 Wheel Drive
Clutch Kit (A18084) Installation Instructions
Introduction
This leaflet explains how to use the clutch kit (A18084) to replace the
clutch eccentric and/or roller on the 4000 mk2 wheel drive.
Removing the clutch eccentric and roller
D5754-1
Clutch roller
Clutch eccentric
M5 x 30 mm screw
Parts supplied
D5752-1
Drive belt
Support plate
Support plate
screws (x2)
Clutch
eccentric (x2)
Belt pulley
Clutch
roller (x2)
