manualshive.com logo in svg

wattsonic WTS-6KW-3P, Руководство пользователя

Поделиться
Скачать
wattsonic WTS-6KW-3P Скачать руководство пользователя страница 6

6

Wattsonic AIO ESS | USER MANUAL

GENERAL INFORMATION

Warning: Read this entire document before installing or using Wattsonic All-in-one 
ESS. Failure to do so or to follow any of the instructions or warnings in this document 
can result in electrical shock, serious injury, or death, or can damage Wattsonic LFP 
Battery, potentially rendering it inoperable.

Warning: A battery can present a risk of electrical shock, fire, or explosion from 
vented gases. Observe proper precautions.

Warning: Wattsonic All-in-one storage system installation must be carried out only 
by Wattsonic Certified Installers, who have been trained in dealing with high voltage 
electricity.

Warning: Wattsonic is heavy and challenging to lift.

Warning: Use Wattsonic LFP Battery only as directed.

Warning: Do not use Wattsonic LFP Battery if it is defective, appears cracked, broken, 
or otherwise damaged, or fails to operate.

Warning: Before beginning the wiring portion of the installation, first power off 
the inverter and then open the AC and DC disconnect switches (if applicable for the 
installation).

Warning: Do not attempt to open, disassemble, repair, tamper with, or modify 
Wattsonic LFP Battery. Wattsonic LFP Battery is not user serviceable. LFP Cells in 
Wattsonic Battery are not replaceable. Contact the Wattsonic Authorized Reseller 
who sold the Wattsonic LFP Battery for any repairs.

Warning: Do not connect Wattsonic LFP Battery to alternating current carrying 
conductors. Wattsonic All-in-one storage system including battery and inverter must 
be wired to either an inverter or a DC combiner panel that is then wired to an inverter. 
No other wiring configuration may be used.

Warning: Wattsonic LFP Battery contains components, such as switches and relays, 
that can produce arcs or sparks.

Warning: To protect Wattsonic LFP Battery and its components from damage when 
transporting, handle with care. Do not impact, pull, drag, or step on Wattsonic LFP 
Battery. Do not subject Wattsonic LFP Battery to any strong force. To help prevent 
damage, leave Wattsonic LFP Battery in its shipping packaging until it is ready to be 
installed.

Warning: Do not insert foreign objects into any part of Wattsonic LFP Battery.

Warning: Do not expose Wattsonic LFP Battery or its components to direct flame.

Warning: Do not install Wattsonic LFP Battery near heating equipment.

Warning: Do not immerse Wattsonic LFP Battery or its components in water or other 
fluids.

Caution: Do not use cleaning solvents to clean Wattsonic LFP Battery, or expose 
Wattsonic LFP Battery to flammable or harsh chemicals or vapors.

Caution: Do not use fluids, parts, or accessories other than those specified in this 
manual, including use of non-genuine Wattsonic parts or accessories, or parts or 
accessories not purchased directly from Wattsonic or a Wattsonic-certified party.

Содержание WTS-6KW-3P





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды