5
EN
4. Product description
5. Installation
Install and connect the Vision
®
Smart Plug respecting the fozllowing guidelines to guarantee an optimal reception:
• The Vision
®
Smart Plug must be mounted at a minimum distance of 50cm of all others wireless materials like GSM,
Wi-Fi router.
• Wiring work related to the Vision
®
Smart Plug must be carried out only when de-energized.
• Connect your Vision
®
Smart Plug to the power supply.
• Depending on your installation, an installation of a Watts RF repeater paired to the central unit must be required to ensure
a correct RF signal transmission
• Turn ON/OFF the socket
1 sec ->
LED Blue / Ø
• Device Paring
2 sec ->
LED flashes Red/Green
• Factory reset
10 sec ->
LED flashes Green
LED status
• Flashing Red /Green: Pairing process initiated
• Flashing : • One Flash red/green/blue: initialization, rebooting
• Green flashing no network connection (2 hours loss) or sensor loss
• Blue flashing over temperature detected
Note : The led is switched off between 8pm and 8am if the plug is associated with a Vision
®
Centrale Unit
or a Vision
®
wireless programmable thermostats.
LED
POWER BUTTON
OUTLET
INLET
