Watts QTCBMX-1S-1M, Инструкция по установке, эксплуатации и обслуживанию

Страница: 4 / 8

5 . Clean inside of blue housing sump with warm water . If desired,
disinfect housing using a teaspoon of household bleach . Add
to filter bowl and fill with water . Let stand 5 minutes and then
discard and rinse .
6 . Insert new QT style filters into the manifold assembly . Push up
and twist each QT cartridge 1/4 turn to the right to properly
install it into the manifold assembly . When making the 1/4 turn,
the cartridge label should come to a stop facing you .
7 . Insert a new prefilter cartridge into the blue prefilter housing . Check
O-ring for damage and replace if damaged or distorted . Make certain
the O-ring is properly positioned and reinstall the filter housing . Tighten
housings hand tight .
Do not overtighten filter housing, overtightening may damage
O-ring(s), cause water leaks, or affect system performance.
8 . Slightly open the inlet ball valve and fully open the ¼" drain
valve . Once full flow of water flows from the drain port, slowly
open the inlet valve to the full open position . Allow water to flush
to drain for 5 minutes .
9 . Slowly close the drain valve and check the system for leaks .
10 . Slowly open the outlet valve to restore water flow to downstream
equipment .
11 . Record filter change date in system maintenance log .
Teflon ® is a registered trademark of E .I . DuPont de Nemours & Company .
Replacement Parts
Description Ordering Code
Filter Head 3/8" Top In/Out Quick Connect HSR-QTHD-QC38
Filter Head 3/8" Side In/Out FNPT HSR-QTHD-TT38
Manifold Head First Stage With NPT Inlet HSR-QTMHF-NPT
Manifold Head First Stage With Oring Inlet HSR-QTMHF-OR
Manifold Head Middle Stage HSR-QTMHM
Manifold Head Last Stage HSR-QTMHL
Manifold Head Only Stage With Oring Inlet HSR-QTMHS-OR
Ball Valve 3/8 NPT Brass HSR-BV3/8
Ball Valve 1/4 NPT Plastic HSR-BV1/4P
Ball Valve 1/4 NPT Brass HSR-BV1/4LH
Ball Valve 1/2 NPT Brass HSR-BV1/2
Inlet Bottom Mount Pressure Gauge HSR-GAUGE
Outlet Back Mount Pressure Gauge HSR-GAUGE-BKM
20" Slimline Prefilter Housing With Gauge Port HSR-20HSPF-12
Slimline O-Ring HSR-RING-S
QTCBMX-1S-1M
4
QTCBMX-1L-.5M
QTCBMX-1L-1M
18.75
10.03
5.56
23.87
10.03
5.56
23.87
10.03
5.56