Watts PVI AQS-14, Руководство по установке

Страница: 2 / 16

5
1
8
3
4
7
2
6
UNPACKING YOUR WATER SOFTENER
1
Valve Cover and Electronic Faceplate
2
Salt Lid
3
Salt Cabinet
4
Resin Cylinder
5 Brine Well Cover
6 Brine Valve
7 Overflow Connection rear of Brinetank
8 Drain Connection on Control Valve
Please Remember
– Only use tablet or pellet salt in your softener!
Notes
1 Serial Number is
on the underside of the salt lid
.
2 Remove all packaging parts from inside the unit.
3 If you need to remove the valve cover for ease of
installation follow the instructions carefully.
To remove valve cover pull towards you slowly, taking care not to
pull off the wire connections.
Please note that the valve cover is connected to the valve motor,
so cannot be removed fully.
2
UNPACKING YOUR WATER SOFTENER
1 Valve Cover and Electronic Faceplate
2 Salt Lid
3 Salt Cabinet
4 Resin Cylinder
5 Brine Well Cover
6 Brine Valve
7 Overflow Connection rear of Brinetank
8 Drain Connection on Control Valve
Notes
1 Serial Number is on the underside of the salt lid.
2 Remove all packaging parts from inside the unit.
3 If you need to remove the valve cover for ease of
installation follow the instructions carefully.
To remove valve cover pull towards you slowly, taking care
not to pull off the wire connections.
Please note that the valve cover is connected to the valve
motor, so cannot be removed fully.
Please Remember – Only use tablet or pellet salt in your softener!
5
1
8
3
4
7
2
6
UNPACKING YOUR WATER SOFTENER
1 Valve Cover and Electronic Faceplate
2 Salt Lid
3 Salt Cabinet
4 Resin Cylinder
5 Brine Well Cover
6 Brine Valve
7 Overflow Connection rear of Brinetank
8 Drain Connection on Control Valve
Please Remember
–
Only use tablet or pellet salt in your softener!
Notes
1 Serial Number is
on the underside of the salt lid
.
2 Remove all packaging parts from inside the unit.
3 If you need to remove the valve cover for ease of
installation follow the instructions carefully.
To remove valve cover pull towards you slowly, taking care not to
pull off the wire connections.
Please note that the valve cover is connected to the valve motor,
so cannot be removed fully.
2
2