2
Calibration Recommendations
It is strongly recommended that each processor be calibrated at least once every two (2) years. This
will help ensure that the
Rionfuser™ Electrofusion Processor
is in proper calibration and should
enable any potential problems to be identified early.
RF-3000LE
When the calibration period has expired the processor will display the message,
"Error 113: Calibra-
tion Required,"
informing the operator that the calibration date has passed.
When this occurs, the
processor will stop performing fusions until it has been recalibrated
.
Rionfuser™ LT
When the calibration period has expired the processor will display the message "Error 113: Calibra-
tion Required," informing the operator that the calibration date has passed. This will not prevent the
processor from performing fusions; however, the processor should be calibrated as soon as possible.
Service Contact Information
Calibrating your Rionfuser™ Electrofusion Processor:
1. Send the processor to a WATTS service center and let our technicians do it.
Call (302) 451-1088 to make arrangements for service and to obtain an RMA number for the return.
Every effort will be made to return processors within 2 business days.
The correct output voltage cannot be assured
if the processor is not calibrated at least once
every two (2) years.
Consult your carrier for the proper method of
packaging the processor for return shipments.
Always insure the package for the full replace-
ment value. Keep in mind that most carriers will
not honor insurance claims if the product is not
shipped in accordance with their guidelines.
WATTS is not responsible for damage caused in
shipping.
NOTICE
NOTICE
