Lync AEGIS Controller
8: APPENDIX D
L-OMM-013_A
• 4/20/2022Technical Support • (800) 433-5654 • Mon-Fri, 8 am - 5 pm EST
82
of
100
8984
CW HD
Recovery/source side temperature
difference above maximum
●
●
8989
CW LD
Recovery/source side temperature
difference below minimum
●
●
9112
Er OL
Oil probe error
●
●
●
9080
Er Suc Suction probe error
●
●
●
9070
Er Ext
External air probe error
●
●
9589
Er Coil Coil pack probe error
●
●
9523
Er BT2
BT2 probe error (double probe
function)
●
●
●
9919
Er BT3 BT3 probe error
●
●
●
8.9.17. Menu - E Alarms Log
Select the E.ALARMS LOG from the main menu by pushing the right button you can access to
the list of the last 100 alarms.
For each event, the following information is reported:
•
the alarm code
•
the type of event, activation or reset
•
alarm timestamp and date
To scroll the list of the reported events press the UP and DOWN buttons.
To delete the list of the events push the “Logger reset” button on the bottom of the display
Please note that only alarms will be deleted, the other logged values (temperatures,
pressures...) stored in the internal memory will be preserved.
8.9.18. Menu - F Defrost
On the main menu, with the F.DEFROST menu selected, press the RIGHT key to access
the screens displaying the defrost status.
Defrosting is composed of 4 phases:
•
enter phase
•
central phase
•
drop-off phase
