Watts Hydro-Safe Steam Max-S1, Инструкция по установке, эксплуатации и обслуживанию

Страница: 2 / 8

2
System Specifications
Maximum Pressure:
Slim Line Systems – 125psi (8 .6 bar), Steam Max Models S1, S1L,
S3 Lime Scale, S3L Lime Scale, S3L+ Lime Scale, and S3
Big Blue Systems – 90 psi (6 .2 bar), Steam Max Models S1BBL,
S1BBLHF, and S3L+
Maximum Temperature: 100°F (38°C)
pH 6 .5 to 8 .5
Hardness (maximum for systems containing OneFlow) 75 grains
(1282 ppm CaCO3)
Chlorine < 2ppm
Iron (maximum) 0 .3 mg/l
Manganese (maximum) 0 .05 mg/l
Copper (for systems containing OneFlow) < 0 .1 mg/l
Oil & H2S- None allowed
Polyphosphate (for systems containing OneFlow)- None allowed
Silica (maximum for systems containing OneFlow) 10 ppm
For all other feed water quality requirements abide by the current
USEPA Safe Drinking Water Act standards .
Inlet/Outlet Connections: 3/8" (10mm) NPT for Slimline Models, 3/4"
(20mm) NPT for Big Blue Models .
Maximum Flow Rate:
System Flow Rate
System Model Flow Rate
Steam Max-S1 1 GPM
Steam Max-S1L 2 GPM
Steam Max-S1BBL 4 GPM
Steam Max-S1BBLHF 6 GPM
Steam Max-S3 Lime Scale 1 GPM
Steam Max-S3L Lime Scale 2 GPM
Steam Max-S3L+ Lime Scale 2 GPM
Steam Max-S3 1 GPM
Steam Max-S3L+ 2 GPM
Steam Max line is available in different configurations depending
upon filtration and flow requirements .
Slimline models use 2
¾
(70mm) in diameter filters and are available
in either 10 " (250mm) or 20 " (500mm) length options . The Slimline
models are equipped with 3/8
"
(10mm) NPT fittings .
Big Blue models use 4½ in diameter filters and are available in either
10 " (250mm) or 20 " (500mm) length options . The Big Blue models
are equipped with 3/4
"
(20mm) NPT fittings .
Teflon
®
is a registered trademark of E .I . DuPont de Nemours & Company .
Replacement Filters
System Replacement Filters
System Model Filter Ordering Code Frequency Description
Steam Max-S1 DOR-OF110RM 12 Months 10" OneFlow Anti-Scale Cartridge
Steam Max-S1L DOR-OF120RM 12 Months 20" OneFlow Anti-Scale Cartridge
Steam Max-S1BBL DOR-OF140RM 12 Months 20" OneFlow Anti-Scale Cartridge
Steam Max-S1BBLHF OFTWHRM 12 Months 20" OneFlow Anti-Scale Cartridge
Steam Max-S3
Lime Scale
STMMAX-S3S-PM All Filters for System Maintenance
HSR-S-SED-5M 6 Months 10" Sediment Pre Filter
STMAXR-S-CB 6 Months 10" Carbon Block
STMAXR-S-ACSC 6 Months 10" Phosphate Scale Control
Steam Max-S3L
Lime Scale
STMMAX-S3L-PM All Filters for System Maintenance
HSR-S-SED-5M 6 Months 10" Sediment Pre Filter
STMAXR-L-CB 6 Months 20" Carbon Block
STMAXR-S-ACSC 6 Months 10" Phosphate Scale Control
Steam Max-S3L+
Lime Scale
STMMAX-S3LPS-PM All Filters for System Maintenance
HSR-S-SED-5M 6 Months 10" Sediment Pre Filter
STMAXR-L-CB 6 Months 20" Carbon Block (2)
STMAXR-S-ACSC 6 Months 10" Phosphate Scale Control
Steam Max-S3
STMMAX-S3SS-PM All Filters for System Maintenance
HSR-S-SED-5M 6 Months
10" Sediment Pre Filter
STMAXR-S-CB 6 Months 10" Carbon Block
DOR-OF110RM 12 Months 10" OneFlow Anti-Scale Cartridge
Steam Max-S3L+
STMMAX-S3LP-PM All Filters for System Maintenance
HSR-S-SED-5M 6 Months 10" Sediment Pre Filter
STMAXR-L-CB 6 Months 20" Carbon Block (2)
DOR-OF140RM 12 Months 20" OneFlow Anti-Scale Cartridge
Filter Cartridge Life Span
Filter cartridges should be changed at end of filter life, due to lack of
filtering performance, or whenever a 15 psi pressure drop or greater is
experienced during normal operation,
whichever comes first .
Please note: Cartridge capacities are estimates and may be less
depending on incoming water quality .
Filter Placement Reference
The replacement filter cartridges are to be installed from left to right,
in any given system, as they appear in the above chart from top to
bottom respectively .
Example: Steam Max-S3 will have a HSR-S-SED-5M in the left hous-
ing, a STMAXR-S-CB in the middle housing and a DOR-OF110RM in
the right housing .